Our Store Promise:

*We are the Only VXDIAG Official Store in Aliexpress 100% Original Product from VXDIAG.
*Advanced Quality Product, 2 Year Warranty.
*Support Dropshopping.
*Best Price with Promo Code(Contact Seller to Get Extra Discount).
*365 Days Free Replacement,if your device problem cannot fix after contact the seller,you can send it back for us to repair or exchange the new one.

Tips：

1.The device include the lifetime license for Porsche 3, it is normal that the authorization is only 60 days old, the license can be updated in VX-Manager for free.
2.We are not support to provide the software link for Porsche.
3.We are not support to provide the support if your device do not buy in our store.
4.Please remember to upgrade the firmware, DoIP, license after you install the new version VX-Manager V1.8.9.0601 via www.vxdiag.net.
5.If you need the VXDIAG Plastic Box, please contact us.
6.If you have a problem about this product, please feel free to contact us, thank you^^

The Highlight of Choosing VCX DoIP for Porsche 3

* New operation system and more intuitive diagnostic interface
* New VCI for post-2017+ vehicles with DoIP diagnosis
* Support special functions like modification or flashing, with Engineering mode (Development version)
* Good at maintenance, repairing, control units changing and programming & setting codes
* Support online immobilizer programming if you have online certificate & account
* Guide fault finding
* Look for maintenance wiring diagram

-Full-System Diagnosis

VXDIAG VCX DoIP for Porsche 3 tool can access and scan all available vehicle modules like Engine, ABS, SRS(airbag), AutoTrans, BCM, HVAC, Suspension, Chassis, Radio, Parking, and etc to read and clear codes, view live data stream, freeze frame, perform active tests and retrieve ECU information.
The scanner can check misfire data, engine speed, transmission fluid temperature, fuel trim, fuel temperature, turn off check engine light, ABS, Airbag warning lights and etc.

-ECU Coding/Adaptation

VCX DoIP ECU Coding Tool comes with advanced ECU Coding capabilities to reprogram the adaptive data for certain components after replacement to enhance vehicle performance and flash hidden functions to customize car settings and disable annoying functions.

-Flash Hidden Functions & Customize Car Settings
Rear-view mirror folding
Disable daytime running light
Disable seat belt alarm beep
Remove maximim speed limiter
Note: this function require an online account. Seller don&x27;t provide it.

-ECU Programming

VCX DoIP automotive diagnostic tool has the capability for Porsche models to program new ECUs or reflash old modules like ECM, PCM, BCM and etc after replacement to solve issues like drivability, power loss, fuel efficiency and fault codes.

- ECU upgrade programming, coding
- Change vehicle configuration VO
- Import vehicle FSC activation code.
- Import/export data software.
- ECU version upgrade/downgrade, ECU repair after ISSS programming failure.
- Flash programming of the control unit.
- Manual input of parameters to read the module, reset the faulty software/hardware number.

-Key Programming

1.Generate Keys Smart
2.Mechanical Key Programming
3.Read Pincode

-Multi Maintence Functions

*Oil Reset：Close the oil service light and reset service mileage & service interval after replacing the engine oil.

*Throttle Relearn: Allows to reset the throttle actuators to accurately regulate throttle (or idle engine) operations, helps keep your idling and acceleration smooth.

*ABS Bleeding: Get a firm brake pad after air exhaustion.

*Electronic Parking Brake Reset：Reset the new electronic parking brake for braking wheels safely again.

*DPF Regeneration: Allows to clear PM from the DPF filter through oxidation or combustion to stabilize the filter performance.

*Injector Coding: Allows to write a new code to the ECU for accurate communication and Injection control. After the ECU or injector is replaced, the cylinder can better identify injectors to accurately control fuel injection.

*SAS Calibration: Allow to clear the fault steering angle sensor memories, perform reset steering angle sensor, and turn off steering wheel warning light.

*Tire Pressure Monitor System Reset: Relearn TPMS sensors so that new sensors can be recognized by ECU.

*BMS Reset: Reset after replacing the battery to clear the low battery fault information of the original battery and protect the new battery.

*Gearbox Match: Matching the gearbox/ transmission after replacement.

More...

-Vehicle Circuit Diagram Query

The vehicle circuit is divided into several independent circuit systems according to functions and working principles. The software of VXDIAG VCX DoIP for Porsche supports circuit component query and maintenance manual, so as to solve the problems of large and complex vehicle circuits and difficult analysis

*Bi-Directional Control(Active Test)
VCX DoIP comes with bi-directional control caplity. It can not only retrieves information from ECUs, but also send commands to ECUs and controls various car parts/subsystems to perform various component tests like Cycling the A/C Clutch On/Off, Fuel Injector Test to locate faulty injector, Cycling ABS Pump Motor, testing Wipers, Windows, Doors, Sunroofs, and etc

*Auto VIN Scan
Auto VIN functions allowing you to quickly figure out Vehicle Identification No. (VIN) to perform fast diagnostic.

*Extented Vehicle Coverage
Support the car year from 2005-now (Compatible with Piwis 2)

*Support Muti-language
German,English,French,Italian,Spanish,Japanese, Russian,Portuguese,Nederlands and etc.